by thefoxnet » Wed Nov 16, 2005 2:57 am
What type of servo control board is it? Can you send specific commands down the ttl to tell the servos what to do or is it just a simple driver circuit.
According to the avrcam manual, the avrcam will send information about tracked objects down the ttl but not ast a servo signal which is PWM somewhere around the 20ms mark.
If like me you are planning to use the servos for tilt and pan movement, you may need another microprocessor to read the information sent via the avicam and then send the appropiate servo signal. You may also be able to modify the avicam source to send the servo signal out directly but this will depend on the space left in the mega8
Hope this helps.