OV6620 sends Black image and no data on PORT Y

This forum is used for discussing hardware, software, and technical details of the AVRcam embedded system.

OV6620 sends Black image and no data on PORT Y

Postby chaps555 » Fri Jul 27, 2007 12:49 am

hello,

I am suddenly getting some different behavior from the chip , the Port Y of the module has turned to be dead , i am not able to receive any data on the port.

can any one tell what can be the problem.

regards

chaps55
chaps555
 
Posts: 15
Joined: Tue Mar 28, 2006 12:51 am

Postby johno » Sat Jul 28, 2007 8:31 am

Are you getting valid data on the UV port? Your post sounds like it is just happening on the Y port.

If its both ports, check your power supply. Are you powering it from a 9 volt battery? If so, try swapping it out with a fresh one (the issue can arise where there is enough juice to power the mega8, but not enough to get the camera to function properly, and thus you can get bad/corrupt/blank images sometimes).
-John O
Site Admin
johno
 
Posts: 51
Joined: Thu Mar 16, 2006 2:29 pm

getting black image by ov6620

Postby chaps555 » Sat Jul 28, 2007 8:47 am

thanks for your reply,

yes my UV port is working fine but Y port doesnot send any thing it i give supply to it also.

regards

chaps555
chaps555
 
Posts: 15
Joined: Tue Mar 28, 2006 12:51 am


Return to AVRcam Embedded System

Who is online

Users browsing this forum: No registered users and 5 guests

cron