Making AVRCam a slave I2C

This forum is used for discussing hardware, software, and technical details of the AVRcam embedded system.

Making AVRCam a slave I2C

Postby Guy Ziv » Thu Aug 17, 2006 7:22 am

I have a microcontroller that can act only as a Master I2C. I want to make a version of the AVRCam software that can send information e.g. tracking information in response to the microcontroller I2C commands. Is it possible to make the AVRCam dual Master/Slave, or otherwise add a "bit banged" I2C slave port on the AVRCam?
Guy Ziv
 
Posts: 1
Joined: Thu Aug 17, 2006 7:20 am

Postby johno » Tue Aug 22, 2006 6:05 am

You may want to check out the following link:

http://www.merlinsystemscorp.co.uk/merl ... cam_Design

These guys have taken the AVRcam, migrated it to a beefier AVR micro (mega64), and added some additional features (one of which is support for I2C interfacing, if I recall). They have all of their software changes released under the GPL, so you can poke around and see what they have.
-John O
Site Admin
johno
 
Posts: 51
Joined: Thu Mar 16, 2006 2:29 pm


Return to AVRcam Embedded System

Who is online

Users browsing this forum: No registered users and 2 guests

cron