Problem on setting TCNT1
Posted: Mon Jul 31, 2006 11:30 pm
Dear all,
So happy to join this forum!
I am a beginner with AVRCam but get a problem during changing cam resolution.
As the line size can be controlled by the value of TCNT1H and TCNT1L (pclk counting). But G color is always 0x01(R and B are fined) if TCNT1H is set lower than 0xFE, setting to 0xFF and 0xFE are fined with the same code.
Am I missing something? Please help.
Tony
So happy to join this forum!
I am a beginner with AVRCam but get a problem during changing cam resolution.
As the line size can be controlled by the value of TCNT1H and TCNT1L (pclk counting). But G color is always 0x01(R and B are fined) if TCNT1H is set lower than 0xFE, setting to 0xFF and 0xFE are fined with the same code.
Am I missing something? Please help.
Tony